Menu
Your Cart

PLANET GT-915A 10/100/1000BASE-T to 100/1000BASE-X SFP Managed Media Converter

PLANET GT-915A 10/100/1000BASE-T to 100/1000BASE-X SFP Managed Media Converter
PLANET GT-915A 10/100/1000BASE-T to 100/1000BASE-X SFP Managed Media Converter
PLANET GT-915A 10/100/1000BASE-T to 100/1000BASE-X SFP Managed Media Converter
PLANET GT-915A 10/100/1000BASE-T to 100/1000BASE-X SFP Managed Media Converter
PLANET GT-915A 10/100/1000BASE-T to 100/1000BASE-X SFP Managed Media Converter
PLANET GT-915A 10/100/1000BASE-T to 100/1000BASE-X SFP Managed Media Converter
PLANET GT-915A 10/100/1000BASE-T to 100/1000BASE-X SFP Managed Media Converter
  • Stock: In Stock
  • Brand: PLANET
  • Model: GT-915A
  • Weight: 0.51kg
  • Dimensions: 7.00cm x 9.40cm x 2.60cm
140.71€
Ex Tax: 113.48€

Remotely Managed Gigabit Converter

PLANET GT-915A 10/100/1000BASE-T to 100/1000BASE-X Managed Media Converter is developed to meet the advanced demand of network applications but it comes with the easy Plug and Play feature. The GT-915A provides all kinds of 10/100/1000Mbps Ethernet Media on RJ45 port and offers highly-stable Gigabit SFP fiber performance. It supports conversion between 10/100/1000BASE-T and 100/1000BASE-X Ethernet, which includes SFP slot with single-mode or multi-mode media as required. The Ethernet signal allows three types of segments to connect easily, efficiently and inexpensively. 

 

 

Enhanced Smart Management Features

The GT-915A provides auto MDI/MDI-X on its TP port and built-in Link Fault Pass-through function (LFP). The LFP function includes Link Loss Carry Forward (LLCF) and Link Loss Return (LLR), both of which can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. 

  • LLCF means when a device connected to the converter and the TP line loses the link, the converter’s fiber port will disconnect the link of transmission. 
  • LLR means when a device connected to the converter and the fiber line loses the link, the converter’s fiber port will disconnect the link of transmission. 

Therefore, the GT-915A greatly supports the administrators to manage the network efficiently.  

 

Network with Cybersecurity Helps Minimize Security Risks

The GT-915A comes with enhanced cybersecurity to fend off cyberthreats and cyberattacks. It supports SSHv2, TLSv1.2 and SNMPv3 protocols to provide strong protection against advanced threats. Served as a key point to transmit data to customer's critical equipment in a business network, the cybersecurity feature of the GT-915A protects the management and enhances the security of the mission-critical network without any extra deployment cost and effort.

 

User-friendly and Centralized Web Management Interface

For efficient management, the GT-915A is equipped with a remote Web/SNMP interface. With its built-in Web-based management, PLANET GT-915A acts as an easy-to-use, platform-independent management and configuration facility. The GT-915A also supports standard Simple Network Management Protocol (SNMP) and can be managed via any standard-based management software. 

 

OAM Management

TS-1000/802.3ah OAM protocol (operation, administration, and maintenance) supported enables remote OAM compliant device to be managed and monitored by the GT-915A.

 

Remotely Manage Solution

PLANET's Universal Network Management System (UNI-NMS) and CloudViewer App support IT staff to remotely manage all network devices and monitor the GT-915A operation statuses. Thus, they're designed for both the enterprises and industries where deployments of the GT-915A can be as remote as possible, without having to go to the actual location once a bug or faulty condition is found. With the UNI-NMS or CloudViewer app, all kinds of businesses can now be speedily and efficiently managed from one platform.

 

Enhanced Traffic Control

The GT-915A can be programmed for advanced management functions such as IP address configuration, DHCP client function, port configuration, converter configuration, 802.1Q tag VLAN, Q-in-Q VLAN, ingress/egress bandwidth control, QoS and Layer protocol filter, and broadcast storm and bandwidth control to enhance bandwidth utilization.

 

Intelligent SFP Diagnosis Mechanism

The GT-915A supports SFP-DDM (digital diagnostic monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP transceivers, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.

Easy Chassis Installation

The GT-915A Media Converter can be used as a stand-alone unit or as a slide-in module to the PLANET Media Converter Chassis (MC-700, MC-1500 and MC-1500R series). The media chassis can assist in providing DC power to the GT-915A Media Converter to maintain the fiber-optic network at one centralized location. It can be DIN-rail or wall mounted for efficient use of cabinet space.

Fiber-optic Networking for ISPs, Enterprises and Homes

With high-speed data transmission and easy installation, the GT-915A can build FTTH (Fiber to the Home) and FTTC (Fiber to the Curb) for ISPs, and FTTB (Fiber to the Building) for enterprises. The GT-915A enables network administrators to easily monitor operations via the Web management interface.

 

 

Physical Port

  • One 1G/100/10BASE-T RJ45 interface with auto MDI/MDI-X function
  • One 1G/100BASE-X SFP interface

 

Layer 2 Features

  • Supports VLAN
    • IEEE 802.1Q tagged VLAN
    • Supports provider bridging (VLAN Q-in-Q, IEEE 802.1ad) 
    • VLAN transparent
  • Storm Control support
    • Broadcast/Multicast/DLF (Destination Lookup Failure)/ARP/ICMP
  • Store-and-Forward mechanism
  • Non-blocking full wire-speed forwarding rate
  • 16K jumbo frame size support 
  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • Automatic address learning and address aging
  • Supports port status/Ethernet statistics on both TP and fiber interfaces
  • Supports Link Fault Passthrough (LFP) and Link Layer Discovery Protocol (LLDP) 

 

OAM Compliant

  • TS-1000 OAM / IEEE 802.3ah OAM / Loop Back Test

 

Quality of Service

  • Ingress Shaper and Egress Rate Limit per port bandwidth control
  • 8 priority queues on all converter ports
  • Strict priority and Weighted Round Robin (WRR) CoS policies
  • Traffic classification
    • IEEE 802.1p CoS
    • IP DSCP
    • IP Address

 

Management

  • IPv4 and IPv6 dual stack management
  • Management Interfaces
    • Web HTTP management
    • Telnet Command Line Interface 
    • SNMP v1, v2c monitoring
    • SSHv2, TLSv1.2 and SNMP v3 secure access
  • System Maintenance
    • Firmware upload/download via HTTP
    • Reset button for system reboot or reset to factory default
  • Network Time Protocol (NTP)
  • SNMP Management
    • SNMP trap for interface link up and link down notification
    • Four RMON groups (history, statistics, alarms and events)
  • Network Diagnostic
    • SFP-DDM (Digital Diagnostic Monitor)
  • Syslog remote alarm
  • Local system Log
  • PLANET Smart Discovery Utility for deploy management
  • PLANET Remote Management
    • PLANET NMS Controller and CloudViewer for deployment management

 

Case and Installation

  • External 5V DC, 2A power supply
  • 0 to 50 degrees C operating temperature 
  • Supports 6000 VDC Ethernet ESD protection
  • Wall mounting and DIN-rail installation supported
  • Works with PLANET’s 10”/19” Media Converter Chassis
    • (MC-700/MC-1500/MC-1500R/MC-1500R48)
  • Plug and Play installation
Hardware Specifications
Copper Interface1 x 10/100/1000BASE-T RJ45 port (Auto-MDI/MDI-X) twisted pair
Fiber Interface1 x 100/1000BASE-X SFP Slot
Reset Button< 10 sec: System reboot
> 10 sec: Factory default
ESD Protection6KV DC
EnclosureCompact-sized metal case
InstallationWall mountable
Media convert Chassis installation
Optional DIN-rail kit
Dimensions (W x D x H)94 x 70 x 26mm
Weight201g (device only)
Power InputDC 5V, 2A
Power Consumption3.4 watts/11.6 BTU (maximum)
LED IndicatorPWR, (Green)
TP LINK/ACT, 1000 (Green)
Fiber LINK/ACT (Green)
Network Cables10/100/1000BASE-T:
10BASE-T: 2-pair UTP Cat. 3,4,5, up to 100 m
100BASE-TX: 2-pair UTP Cat. 5, up to 100 m
1000BASE-T: 4-pair STP Cat 5 up to 100m

100/1000GBASE-SX/LX:
50/125μm or 62.5/125μm multi-mode fiber cable, up to 220/550m.
9/125μm single-mode cable, extending long distance to 10/20/40/60/80/120km (vary on
fiber transceiver or SFP module)
Switching Specifications
Switch Processing SchemeStore and Forward
Fabric4Gbps
Throughput (packet per second)2.98Mpps@64bytes
Address Table1K entries, automatic source address learning and aging
Flow ControlBack pressure for half duplex
IEEE 802.3x pause frame for full duplex
Jumbo Frame16K
Shared Buffer512Kb
Layer 2 Function
Port ConfigurationPort disable/enable
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
Flow control disable/enable
Port StatusDisplay each port’s speed duplex mode, link status, flow control status,
auto negotiation status
VLANIEEE 802.1Q tag-based VLAN
IEEE 802.1ad Q-in-Q tunneling
Up to 16 VLAN groups, out of 4094 VLAN IDs
Management VLAN
Bandwidth ControlPer port bandwidth control
Ingress: 1~1000,000Kbps
Egress: 1~1000,000Kbps
QoSTraffic classification based, strict priority and WRR
8-level priority for switching
Traffic classification:
802.1p priority
IP DSCP
IP Address
Security Function
Access SecurityRemote management protocols control by SSH, Telnet, HTTP ans HTTPs
System Management
Basic Management InterfacesTelnet; Web browser; SNMP v1, v2c
Secure Management InterfacesSSHv2, TLS v1.2, SNMP v3
System ManagementFirmware upgrade by HTTP protocol through Ethernet network
Configuration upload/download through HTTP
LLDP protocol
NTP
PLANET Smart Discovery Utility
PLANET CloudViewer app
Event ManagementRemote syslog
Local system log
SNMP trap
Standards Conformance
Regulatory ComplianceFCC Class A, CE Class A
Standards ComplianceIEEE 802.3, 10BASE-T
IEEE 802.3u, 100BASE-TX/FX
IEEE 802.3ab, 1000BASE-T
IEEE 802.3z, 1000BASE-SX/LX
IEEE 802.3x full-duplex flow control
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN tagging
IEEE 802.1ad Q-in-Q VLAN stacking
IEEE 802.1ab LLDP
IEEE 802.3ah OAM
RFC 768 UDP
RFC 793 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 2068 HTTP
Environment
OperatingTemperature: 0 ~ 50 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
StorageTemperature: -10 ~ 70 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)

 

Datasheet

DateVersionDescriptionDownload
2023-09-231.0GT-915A

 

Firmware

DateVersionDescriptionDownload
2024-05-311.44b240522Function Added:
- Added PSTI function.
- Modified DDM function.
FW upgrade for PSTIA (Product Security and Telecommunications Infrastructure Act)
*Note: After updating the firmware, you will need to enter the product's MAC code at the first login. Please record the MAC code before proceeding with the update.

 

Quick Guide

DateVersionDescriptionDownload
2024-06-111.1Release for PSTI version.
2022-12-091.0Initial release.

 

User's Manual

DateVersionDescriptionDownload
2023-02-041.0Initial release.

 

EC Declaration

DateVersionDescriptionDownload
2023-04-181.0EC Declaration.