Menu
Καλάθι Αγορών

PLANET IVC-234GT IP30 Industrial Gigabit Ethernet Extender w/ G.vectoring, 4-Port 10/100/1000T RJ45 (LAN), 1-Port BNC, 1-Port RJ11

PLANET IVC-234GT IP30 Industrial Gigabit Ethernet Extender w/ G.vectoring, 4-Port 10/100/1000T RJ45 (LAN), 1-Port BNC, 1-Port RJ11
PLANET IVC-234GT IP30 Industrial Gigabit Ethernet Extender w/ G.vectoring, 4-Port 10/100/1000T RJ45 (LAN), 1-Port BNC, 1-Port RJ11
PLANET IVC-234GT IP30 Industrial Gigabit Ethernet Extender w/ G.vectoring, 4-Port 10/100/1000T RJ45 (LAN), 1-Port BNC, 1-Port RJ11
PLANET IVC-234GT IP30 Industrial Gigabit Ethernet Extender w/ G.vectoring, 4-Port 10/100/1000T RJ45 (LAN), 1-Port BNC, 1-Port RJ11
PLANET IVC-234GT IP30 Industrial Gigabit Ethernet Extender w/ G.vectoring, 4-Port 10/100/1000T RJ45 (LAN), 1-Port BNC, 1-Port RJ11
PLANET IVC-234GT IP30 Industrial Gigabit Ethernet Extender w/ G.vectoring, 4-Port 10/100/1000T RJ45 (LAN), 1-Port BNC, 1-Port RJ11
PLANET IVC-234GT IP30 Industrial Gigabit Ethernet Extender w/ G.vectoring, 4-Port 10/100/1000T RJ45 (LAN), 1-Port BNC, 1-Port RJ11
  • Διαθεσιμοτητα: Άμεσα Διαθέσιμο
  • Κατασκευαστης: PLANET
  • Κωδικος Προϊοντος: IVC-234GT
  • Βαρος: 0.66kg
262,01€
Χωρίς ΦΠΑ: 211,30€

High Performance Industrial Gigabit Ethernet Extender 

To fulfill the needs of long distance and higher speed required Ethernet over Coaxial or 2-wired UTP applications, PLANET Technology offers a new Industrial Ethernet Extender, IVC-234GT. It features one BNC port and one RJ11 port for long-distance connection with the VDSL2 (Very-high-bit-rate Digital Subscriber Line 2) technology, and 4 10/100/1000BASE-T RJ45 Ethernet ports. Its slim-sized metal housing makes the placement of the unit convenient. Working well with a pervasive coaxial or RJ11 network, the IVC-234GT provides an excellent bandwidth of up to a total duplex data rate of 300Mbps which can extend a maximum distance up to 1.2km

If the IP network that consists of HD IP camera, wireless access point, NVR and digital signage display requires an extension of beyond the 100-meter distance, the IVC-234GT will be the best option as it can transmit data over the coaxial cable or telephone wire. A 100-meter distance can only be extended on an UTP cable.

Superior Upstream and Downstream Transmission

The design of the IVC-234GT is based on the two-core networking technology, Gigabit Ethernet and VDSL2. The IVC-234GT offers a stable yet high-speed point-to-point network access up to a duplex data transmission of 300Mbps. It provides 2 selective transmission modes -- asymmetric mode or symmetric mode -- for the transmission of upstream and downstream signals.

  ■ Asymmetric mode – downstream up to 200Mbps and upstream up to 100Mbps

  ■ Symmetric mode – downstream up to 150Mbps and upstream up to 150Mbps

The symmetric mode provides the similar transmission rate on both downstream and upstream while the asymmetric mode performs higher transmission quality in short range. In all, when the IVC-234GT is in the symmetric mode, it provides a better upstream performance, and when it is in the asymmetric mode, it gives a better downstream performance.

 

Ethernet over Long Distance Existing Coaxial or RJ11 Cable

The IVC-234GT is also a Long Reach Ethernet (LRE) solution which provides a quick replacement and smooth migration solution from the existing analog system to full digital system.  It features two types of transmission, the coaxial or RJ11. A normal UTP cable can only be extended up to 100 meters, but with the IVC-234GT, the distance for Ethernet networking can be extended up to 1,200 meters (3,937ft.), which is ideal for the following network applications:

  ■ Long-distance IP network devices

  ■ IP digital signage 

  ■ Cable TV to IPTV

  ■ Distance video education

  ■ Electronic billboards

  ■ Other applications

If you have coaxial or RJ11 cable in your existing environment, you can install a pair of the IVC-234GT very simply without the need to build additional network wires, thus saving costs for network construction.

Easy and Flexible Installation

The IVC-234GT offers two operation modes, the client-side CPE and central-side CO, making any network applications easy and flexible. The CPE or CO mode can be adjusted by using the built-in DIP switch. For point-to-point connection, one IVC-234GT in CPE mode and the other one in CO mode must be set up as a pair of converters to perform the connection. This enables the administrator to efficiently manage the network over coaxial cable, making long-distance transmission better.

ADSL2+ Fallback

For ISPs  providing ADSL broadband services, the IVC-234GT can support a downstream rate of up to 24Mbps and an upstream rate of 1Mbps with the ADSL2+ technology. The IVC-234GT can also be directly switched over to VDSL2 after the network upgrade.

Point-to-Point Application -- LAN to LAN Connection

One set of the IVC-234GT could be used to link two local Area networks that are located in different places. Through the coaxial cable, it could set up a 200/100Mbps asymmetric backbone, but one IVC-234GT must be Master (CO mode) and the other one is Slave (CPE mode).

Community/Campus Surveillance and Security over IP

To take advantage of digital surveillance system and keep the benefits of coaxial cable/RJ11 of the IVC-234GT, communities, campuses and enterprises can upgrade their analog camera system to IP camera surveillance system without using additional new wires. As the IVC-234GT comes with one RJ45 port and one BNC Ethernet over Coaxial port, just plug in the UTP cable of IP camera to the Ethernet port and the existing coaxial cable to the BNC connector to easily deploy and extend the distance with signal conversion by transmitting the Ethernet data from the standard coaxial cable.

Long Reach Ethernet

  • ITU-T G.993.5 G.Vectoring and G.INP
  • Upstream/Downstream bandwidth up to 200/100Mbps
  • CO/CPE mode selectable via DIP switch
  • Selectable target band plan and SNR margin
  • One BNC/RJ11 connector for VDSL connection
  • Uses existing RG59/RG6 coaxial cable
  • Used in pairs to extend Point-to-Point connection up to 1.2km
  • Supports IEEE 802.1Q VLAN tag transparency

 

Industrial Case and Installation

  • Slim-type IP30 metal case
  • DIN rail and wall-mount design
  • 12 to 48V DC, redundant power with polarity reverse protect function
  • AC 24V power adapter acceptable
  • Supports 6000 VDC Ethernet ESD protection
  • -40 to 75 degrees C operating temperature
  • Minimum installation time (Simply by Plug and Play)
  • Supports extensive LED indicators for network diagnosis
Hardware Specifications
TP interface4 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
VDSL BNC1 BNC female Ethernet over Coaxial port
Cabling:
Coaxial cable: 75 ohm
RG-6/U cable, less than12Ω/1000 ft
RG-59/U cable, less than 30Ω/1000 ft.
Maximum Distance:
Max. 1.2km with data transmission (3,937ft.)
VDSL RJ111 VDSL2/ADSL2+ RJ11 female phone jack
Twisted-pair telephone wires (AWG-24 or better) up to 1.2km (3,937ft.)
DIP Switch & FunctionalityDIP-1: Select CO or CPE mode
DIP-2: Select G.INP or Interleaved mode
DIP-3: Select Band Profile (Asymmetric or Symmetric)
DIP-4: Select SNR of 12dB or 8dB
LED IndicatorsPower 1/Power 2: Green
FAULT: Red
1000BASE-T LNK/ACT: Green
10/100BASE-TX LNK/ACK: Green
VDSL: Green
CO: Green
CPE: Green
ESD Protection6KV DC
EnclosureIP30 slim metal case
InstallationDIN-rail kit or wall-mount ear
Dimensions (W x D x H)32 x 135 x 87.8mm
Weight185g
Power RequirementDC input: Dual 12~48V DC, 0.4A max.
24V AC
Power Consumption5.7 watts
Performance
Upstream/ Downstream Performance Table with RJ11 Cable
  • CO, Interleave, Asym, 8dB

  • 200M -> 93Mbps/190Mbps
    400M -> 67Mbps/164Mbps
    600M -> 38Mbps/116Mbps
    800M -> 24Mbps/59Mbps
    1000M -> 9Mbps/45Mbps
    1200M -> 6Mbps/30Mbps

  • CO, Interleave, Sym, 8dB

  • 200M -> 143Mbps/148Mbps
    400M -> 118Mbps/119Mbps
    600M -> 71Mbps/75Mbps
    800M -> 49Mbps/36Mbps
    1000M -> 21Mbps/25Mbps
    1200M -> 16Mbps/24Mbps

  • G.INP, ASym, 8dB

  • 200M -> 92Mbps/190Mbps
    400M -> 68Mbps/165Mbps
    600M -> 37Mbps/112Mbps
    800M -> 27Mbps/56Mbps
    1000M -> 9Mbps/46Mbps
    1200M -> 5Mbps/31Mbps

  • G.INP, sym, 8dB

  • 200M -> 143Mbps/148Mbps
    400M -> 116Mbps/115Mbps
    600M -> 71Mbps/69Mbps
    800M -> 49Mbps/32Mbps
    1000M -> 19Mbps/27Mbps
    1200M -> 16Mbps/23Mbps

  • CO, Interleave, Asym, 12dB

  • 200M -> 85Mbps/174Mbps
    400M -> 59Mbps/146Mbps
    600M -> 28Mbps/94Mbps
    800M -> 22Mbps/49Mbps
    1000M -> 7Mbps/40Mbps
    1200M -> 3Mbps/28Mbps

  • CO, Interleave, Sym, 12dB

  • 200M -> 132Mbps/126Mbps
    400M -> 103Mbps/104Mbps
    600M -> 59Mbps/60Mbps
    800M -> 38Mbps/27Mbps
    1000M -> 15Mbps/24Mbps
    1200M -> 6Mbps/20Mbps

  • G.INP, Asym, 12dB

  • 200M -> 85Mbps/174Mbps
    400M -> 57Mbps/144Mbps
    600M -> 28Mbps/94Mbps
    800M -> 22Mbps/49Mbps
    1000M -> 7Mbps/40Mbps
    1200M -> 3Mbps/28Mbps

  • G.INP, Sym, 12dB

  • 200M -> 129Mbps/136Mbps
    400M -> 99Mbps/96Mbps
    600M -> 61Mbps/55Mbps
    800M -> 39Mbps/24Mbps
    1000M -> 15Mbps/26Mbps
    1200M -> 12Mbps/20Mbps
    Upstream/ Downstream Performance Table with Coaxial Cable
  • CO, Interleave, Asym, 8dB

  • 200M -> 54Mbps/184Mbps
    400M -> 49Mbps/148Mbps
    600M -> 36Mbps/100Mbps
    800M -> 21Mbps/50Mbps
    1000M -> 7Mbps/42Mbps
    1200M -> 5Mbps/27Mbps

  • CO, Interleave, Sym, 8dB

  • 200M -> 131Mbps/148Mbps
    400M -> 93Mbps/118Mbps
    600M -> 77Mbps/66Mbps
    800M -> 44Mbps/30Mbps
    1000M -> 20Mbps/25Mbps
    1200M -> 13Mbps/27Mbps

  • G.INP, ASym, 8dB

  • 200M -> 89Mbps/185Mbps
    400M -> 57Mbps/155Mbps
    600M -> 33Mbps/75Mbps
    800M -> 17Mbps/66Mbps
    1000M -> 13Mbps/59Mbps
    1200M -> 4Mbps/32Mbps

  • G.INP, sym, 8dB

  • 200M -> 140Mbps/144Mbps
    400M -> 104Mbps/113Mbps
    600M -> 62Mbps/73Mbps
    800M -> 40Mbps/29Mbps
    1000M -> 20Mbps/27Mbps
    1200M -> 14Mbps/20Mbps

  • CO, Interleave, Asym, 12dB

  • 200M -> 75Mbps/169Mbps
    400M -> 54Mbps/128Mbps
    600M -> 26Mbps/80Mbps
    800M -> 17Mbps/39Mbps
    1000M -> 5Mbps/29Mbps
    1200M -> 3Mbps/28Mbps

  • CO, Interleave, Sym, 12dB

  • 200M -> 125Mbps/128Mbps
    400M -> 89Mbps/99Mbps
    600M -> 64Mbps/53Mbps
    800M -> 37Mbps/26Mbps
    1000M -> 19Mbps/28Mbps
    1200M -> 15Mbps/20Mbps

  • G.INP, Asym, 12dB

  • 200M -> 79Mbps/166Mbps
    400M -> 47Mbps/137Mbps
    600M -> 31Mbps/73Mbps
    800M -> 13Mbps/45Mbps
    1000M -> 6Mbps/38Mbps
    1200M -> 3Mbps/22Mbps

  • G.INP, Sym, 12dB

  • 200M -> 117Mbps/123Mbps
    400M -> 89Mbps/96Mbps
    600M -> 52Mbps/43Mbps
    800M -> 39Mbps/24Mbps
    1000M -> 15Mbps/26Mbps
    1200M -> 12Mbps/20Mbps
    Switch Specifications
    Switch Processing SchemeStore-and-Forward
    Address Table2K entries
    Flow ControlBack pressure for half duplex
    IEEE 802.3x pause frame for full duplex
    Jumbo Packet Size9K bytes
    System Specifications
    VDSL ComplianceVDSL-DMT
    ITU-T G.993.1 VDSL
    ITU-T G.997.1
    ITU-T G.993.2 VDSL2 (Profile 17a/30a Support)
    ITU-T G.993.5 G. Vectoring
    ITU-T G.998
    G.INP
    ADSL ComplianceCapable of ADSL2/2+ standard
    ITU G.992.3 G.dmt.bis
    ITU G.992.5 G.dmt.bisplus
    Data Rate: Up to 24Mbps
    Standards Conformance
    Standards ComplianceIEEE 802.3 Ethernet
    IEEE 802.3u Fast Ethernet
    IEEE 802.3ab Gigabit Ethernet
    ITU-T G.993.1 VDSL
    ITU-T G.997.1
    ITU-T G.993.2 VDSL2 (Profile 17a/30a Support)
    ITU-T G.993.5 G.Vectoring and G.INP
    ITU-T G.998
    Regulatory ComplianceFCC Part 15 Class A, CE
    Environment
    TemperatureOperating: -40~75 degrees C
    Storage: -40~75 degrees C
    HumidityOperating: 5~95% (non-condensing)
    Storage: 5~95% (non-condensing)

     

    Datasheet

    DateVersionDescriptionDownload
    2021-01-291.0IVC-234GT

     

    User's Manual

    DateVersionDescriptionDownload
    2018-09-141.0Initial release.

     

    EC Declaration

    DateVersionDescriptionDownload
    2019-06-031.0EC Declaration.