Menu
Your Cart

PLANET IGS-4215-16T2S-U Industrial L2/L4 16-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Switch

PLANET IGS-4215-16T2S-U Industrial L2/L4 16-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Switch
PLANET IGS-4215-16T2S-U Industrial L2/L4 16-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Switch
PLANET IGS-4215-16T2S-U Industrial L2/L4 16-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Switch
PLANET IGS-4215-16T2S-U Industrial L2/L4 16-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Switch
PLANET IGS-4215-16T2S-U Industrial L2/L4 16-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Switch
PLANET IGS-4215-16T2S-U Industrial L2/L4 16-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Switch
PLANET IGS-4215-16T2S-U Industrial L2/L4 16-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Switch
PLANET IGS-4215-16T2S-U Industrial L2/L4 16-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Switch
PLANET IGS-4215-16T2S-U Industrial L2/L4 16-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Switch
PLANET IGS-4215-16T2S-U Industrial L2/L4 16-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Switch
PLANET IGS-4215-16T2S-U Industrial L2/L4 16-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Switch
PLANET IGS-4215-16T2S-U Industrial L2/L4 16-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Switch
PLANET IGS-4215-16T2S-U Industrial L2/L4 16-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Switch
  • Stock: In Stock
  • Brand: PLANET
  • Model: IGS-4215-16T2S-U
  • Weight: 1.23kg
  • Dimensions: 10.70cm x 6.60cm x 15.20cm
528.88€
Ex Tax: 426.51€

Cost-effective Full Solution Ideal for Hardened Environment

Designed to be installed in heavy industrial demanding environments, the IGS-4215-16T2S / IGS-4215-16T2S-U is the new member of PLANET Industrial-grade, DIN-rail type L2/L4 Managed Gigabit Switch family to improve the availability of critical business applications. It provides IPv6/IPv4 dual stack management and built-in L2/L4 Gigabit switching engine along with 16 10/100/1000BASE-T ports, and 2 extra 100/1000BASE-X SFP fiber slots for data and video uplink. The IGS-4215-16T2S / IGS-4215-16T2S-U is able to operate reliably, stably and quietly in any hardened environment without affecting its performance. It comes with operating temperature ranging from -40 to 75 degrees C in a rugged IP30 metal housing.

  
 

Environmentally Hardened Design

With the IP30 industrial case, the IGS-4215-16T2S / IGS-4215-16T2S-U provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb-side traffic control cabinets without air conditioner. Being able to operate under the temperature range from -40 to 75 degrees C, the IGS-4215-16T2S / IGS-4215-16T2S-U can be placed in almost any difficult environment.

Robust Protection

The IGS-4215-16T2S / IGS-4215-16T2S-U provides contact discharge of ±6KV DC and air discharge of ±8KV DC for Ethernet ESD protection. It also supports ±4KV surge immunity to improve product stability and protects users’ networks from devastating ESD attacks, making sure the flow of operation does not fluctuate.

Redundant Ring, Fast Recovery for Critical Network Applications

The IGS-4215-16T2S / IGS-4215-16T2S-U supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, Spanning Tree Protocol (802.1s MSTP) into customer’s network to enhance system reliability and uptime in various environments.

Robust Layer 2 Features

The IGS-4215-16T2S / IGS-4215-16T2S-U can be programmed for advanced switch management functions such as dynamic port link aggregation, 802.1Q VLAN, Q-in-Q VLAN, Multiple Spanning Tree Protocol (MSTP), loop and BPDU guard, IGMP snooping, and MLD snooping. Via the link aggregation, the IGS-4215-16T2S / IGS-4215-16T2S-U allows the operation of a high-speed trunk to combine with multiple ports such as an 8Gbps fat pipe, and supports fail-over as well.  Also, the Link Layer Discovery Protocol (LLDP) is the Layer 2 protocol included to help discover basic information about neighboring devices on the local broadcast domain.

IPv6/IPv4 Dual Stack Management

Supporting both IPv6 and IPv4 protocols, the IGS-4215-16T2S / IGS-4215-16T2S-U helps the SMBs to step in the IPv6 era with the lowest investment as its network facilities need not be replaced or overhauled if the IPv6 FTTx edge network is set up.

Efficient Traffic Control

The IGS-4215-16T2S / IGS-4215-16T2S-U is loaded with robust QoS features and powerful traffic management to enhance services to business-class data, voice, and video solutions. The functionality includes broadcast/multicast/unicast storm control, per port bandwidth control, 802.1p/CoS/IP DSCP QoS priority and remarking. It guarantees the best performance in VoIP and video stream transmission, and empowers the enterprises to take full advantage of the limited network resources.

 

User-friendly and Secure Management 

The IGS-4215-16T2S / IGS-4215-16T2S-U comes with enhanced cybersecurity to fend off cyberthreats and cyberattacks. It supports SSHv2, TLSv1.2 and SNMPv3 protocols to provide strong protection against advanced threats. Served as a key point to transmit data, the cybersecurity feature of the IGS-4215-16T2S / IGS-4215-16T2S-U protects the switch management and enhances the security of the mission-critical network without any extra deployment cost and effort.

Powerful Security

PLANET IGS-4215-16T2S / IGS-4215-16T2S-U offers comprehensive IPv4/IPv6 Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1X port-based user and device authentication, which can be deployed with RADIUS to ensure the port level security and block illegal users. With the Protected Port function, communication between edge ports can be prevented to guarantee user privacy. Furthermore, Port Security function allows limiting the number of network devices on a given port.

Advanced Network Security 

The IGS-4215-16T2S / IGS-4215-16T2S-U also provides DHCP Snooping, IP Source Guard and Dynamic ARP Inspection functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrators can now construct highly-secure corporate networks with considerably less time and effort than before.

Remote Management Solution

PLANET's Universal Network Management System (UNI-NMS) and CloudViewer app support IT staff by remotely managing all network devices and monitoring PDs' operational statuses. Thus, they're designed for both the enterprises and industries where deployments of PDs can be as remote as possible, without having to go to the actual location once a bug or faulty condition is found. With the UNI-NMS or CloudViewer app, all kinds of businesses can now be speedily and efficiently managed from one platform.

Flexibility and Long-distance Extension Solution

The two additional SFP slots built in the IGS-4215-16T2S / IGS-4215-16T2S-U support 100BASE-FX /1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber transceivers to uplink to backbone switch in long distance. The distance can be extended from 550 meters to 2 kilometers (multi-mode fiber) and up to 120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.

Intelligent SFP Diagnosis Mechanism

The IGS-4215-16T2S / IGS-4215-16T2S-U supports SFP-DDM (Digital Diagnostic Monitor) function that can easily monitor real-time parameters of the SFP for the network administrator, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.

Industrial-grade Switch for Building Automation and Security

Suitable for buildings where security is strictly to be enforced, the IGS-4215-16T2S / IGS-4215-16T2S-U, with  sixteen high-speed Gigabit Ethernet interfaces, can easily build a power centrally controlled for an IP phone system, IP surveillance system, and wireless AP group in the harsh Industrial environment. 

 

 

Model that Withstands Harsh Operation and Extends Distance

The IGS-4215-16T2S / IGS-4215-16T2S-U is made to withstand any harsh operation in such environments as traffic control cabinets, factory floors, and indoor and outdoor locations where temperatures are extremely high or low. With a non-blocking design and compact size, the installation of the IGS-4215-16T2S / IGS-4215-16T2S-U is easy and helpful to build a Gigabit high-bandwidth switched network quickly.

 

 

 

ITU-T G.8032 ERPS Makes Data Transmission Uninterrupted 

The IGS-4215-16T2S / IGS-4215-16T2S-U features strong rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology into customer’s automation network to enhance system reliability and uptime. Applying the IEEE 802.3at Power over Ethernet standard, the IGS-4215-16T2S / IGS-4215-16T2S-U can directly connect with any IEEE 802.3at end-nodes like PTZ (Pan, Tilt & Zoom) network cameras and speed dome cameras. The IGS-4215-16T2S / IGS-4215-16T2S-U can easily help system integrators with the available network infrastructure to build wireless AP, IP camera and VoIP systems where power can be centrally-controlled.

 

 

Physical Port

  • 16-port 10/100/1000BASE-T RJ45 with auto MDI/MDI-X function 
  • 2 SFP interfaces, supporting 100/1000BASE-X SFP transceiver type auto detection 
  • 1-port RJ45 console for basic management and setup (IGS-4215-16T2S only)
  • 1-port USB console for basic management and setup (IGS-4215-16T2S-U only)

 

Industrial Case and Installation

  • Dual power input, redundant power with reverse polarity protection
    • DC 12 to 48V input or AC 24V input (IGS-4215-16T2S only)
    • DC 9 to 48V input or AC 24V input (IGS-4215-16T2S-U only)
    • Active-active redundant power failure protection
    • Backup of catastrophic power failure on one supply
    • Fault tolerance and resilience
  • IP30 metal case
  • DIN-rail and wall-mount designs
  • Supports ESD 6KV DC Ethernet protection 
  • Supports -40 to 75 degrees C operating temperature
  • Free fall, shock-proof and vibration-proof for industries
  • Fanless design

 

Switching

  • Features Store-and-Forward mode with wire-speed filtering and forwarding rates
  • IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
  • 8K MAC address table size
  • 10K jumbo frame
  • Automatic address learning and address aging
  • Supports CSMA/CD protocol

 

Layer 2 Features

  • Supports VLAN
    • IEEE 802.1Q tagged VLAN
    • Up to 256 VLAN groups, out of 4096 VLAN IDs
    • Provider bridging (VLAN Q-in-Q, IEEE 802.1ad) support
    • Private VLAN (Protected port)
    • Protocol-based VLAN
    • Voice VLAN
    • GVRP
  • Supports Spanning Tree Protocol
    • IEEE 802.1D Spanning Tree Protocol (STP)
    • IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
    • IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), spanning tree by VLAN
    • BPDU Guard
  • Supports Link Aggregation
    • IEEE 802.3ad Link Aggregation Control Protocol (LACP)
    • Cisco ether-channel (static trunk)
    • Up to 8 trunk groups
    • Up to 8 ports per trunk group with 16Gbps bandwidth
  • Provides port mirror (many-to-1)
  • IPv6 MAC/VLAN/Multicast Address Table
  • Loop protection to avoid broadcast loops
  • Supports ERPS (Ethernet Ring Protection Switching)

 

Quality of Service

  • Ingress/Egress Rate Limit per port bandwidth control
  • Support 8 priority queues on all switch ports
  • Traffic classification
    • IEEE 802.1p CoS
    • IP TOS/DSCP/IP precedence of IPv4/IPv6 packets
    • IP TCP/UDP port number
    • Typical network application
  • DSCP remarking

 

Multicast

  • Supports IPv4 IGMP snooping v1, v2, v3
  • Supports IPv6 MLD snooping v1, v2
  • Querier mode support
  • IGMP snooping port filtering
  • MLD snooping port filtering

 

Security

  • Storm Control support
    • Broadcast/Multicast/Unicast
  • Authentication
    • IEEE 802.1X port-based network access authentication
    • Built-in RADIUS client to cooperate with the RADIUS servers
    • DHCP Relay and DHCP Option 82
    • RADIUS/TACACS+ users access authentication
  • Access Control List
    • IPv4/IPv6 IP-based ACL
    • IPv4/IPv6 IP-based ACE
    • MAC-based ACL
    • MAC-based ACE
  • MAC Security
    • Static MAC
    • MAC filtering
  • Port security for source MAC address entries filtering
  • DHCP snooping to filter distrusted DHCP messages
  • Dynamic ARP inspection discards ARP packets with invalid MAC address to IP address binding
  • IP source guard prevents IP spoofing attacks
  • IP address access management to prevent unauthorized intruder

 

Management

  • IPv4 and IPv6 dual stack management
  • Switch Management Interface
    • IPv4/IPv6 Web switch management 
    • Console and telnet Command Line Interface
    • SNMP v1 and v2c switch management
    • SSHv2, TLSv1.2 and SNMP v3 secure access
  • IPv6 IP address/NTP/DNS management
  • Built-in Trivial File Transfer Protocol (TFTP) client
  • Static and DHCP for IP address assignment
  • System Maintenance
    • Firmware upload/download via HTTP/TFTP
    • Hardware reset button for system reboot or reset to factory default 
    • Dual images
  • User Privilege levels control
  • Network Time Protocol (NTP)
  • Link Layer Discovery Protocol (LLDP) and LLDP-MED
  • Syslog remote alarm
  • SNMP Management
    • SNMP trap for interface link up and link down notification
    • Four RMON groups (history, statistics, alarms and events)
  • PLANET Smart Discovery Utility for deployment management
  • PLANET NMS system and CloudViewer for deployment management
  • Network diagnostic
    • SFP-DDM (Digital Diagnostic Monitor)
    • Cable diagnostic technology provides the mechanism to detect and report potential cabling issues
    • ICMPv6 / ICMPv4 remote ping
    • Live remote checking is designed to make sure the devices are still connected
Hardware Specifications
Copper Ports16 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
Gigabit SFP Slots2 100/1000BASE-SX/LX/BX SFP interfaces
ConsoleIGS-4215-16T2S:1 RJ45 serial port (115200,8, N, 1)
IGS-4215-16T2S-U:1 Micro-USB female port (115200,8, N, 1)
RAM128Mbytes
Flash Memory16Mbytes
Reset Button< 5 sec: System reboot
> 5 sec: Factory default
ConnectorRemovable 6-pin terminal block for power input
Pin 1/2 for Power 1
Pin 3/4 for fault alarm
Pin 5/6 for Power 2
AlarmOne relay output for power failure.
Alarm relay current carry ability: 1A @ 24V DC
Power RequirementsIGS-4215-16T2S:
Dual 12~48V DC
24V AC
IGS-4215-16T2S-U:
Dual 9~48V DC
24V AC
Power ConsumptionIGS-4215-16T2S:
DC input:
Max. 3.4 watts/11.6BTU (System on)
Max. 12.5 watts/42.7BTU (Full loading)

AC input:
Max. 6 watts/20.5BTU (System on)
Max. 15 watts/51.2BTU (Full loading)

IGS-4215-16T2S-U:
DC input:
Max. 3.31 watts/11.3BTU (System on)
Max.10.41 watts/35.5BTU (Full loading)

AC input:
Max. 3 watts/10.2BTU (System on)
Max. 10 watts/34.1BTU (Full loading)
Dimensions (W x D x H)66 x 107 x 152 mm
WeightIGS-4215-16T2S:813g
IGS-4215-16T2S-U:829g
EnclosureIP30 metal case
InstallationDIN-rail kit and wall-mount ear
ESD Protection6KV DC
LEDSystem
Green: Power 1
Green: Power 2
Red: Power Fault
Per 10/100/1000T RJ45 Ports
Green: 1000 LNK/ACT
Orange: 10/100 LNK/ACT
Per SFP Interface
Green: 1000 LNK/ACT
Orange: 100 LNK/ACT
Switching Specifications
Switch ArchitectureStore-and-Forward
Switch Fabric36Gbps (non-blocking)
Switch Throughput@64 bytes26.79Mpps@ 64 bytes
MAC Address Table8K entries
Shared Data Buffer4.1Mbits
Flow ControlIEEE 802.3x pause frame for full duplex
Back pressure for half duplex
Jumbo Frame10 Kbytes
Layer 2 Functions
Port MirroringTX/RX/Both
Many-to-1 monitor
Up to 4 sessions
VLAN802.1Q tagged-based VLAN
Up to 256 VLAN groups, out of 4094 VLAN IDs
802.1ad Q-in-Q tunneling (VLAN stacking)
Voice VLAN
Protocol VLAN
Private VLAN (Protected port)
GVRP
Link AggregationIEEE 802.3ad LACP and static trunk
Cisco ether-channel (Static Trunk)
Up to 8 trunk groups
Up to 8 ports per trunk group with 16Gbps bandwidth
Spanning Tree ProtocolIEEE 802.1D Spanning Tree Protocol (STP)
IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
STP BPDU Guard, BPDU Filtering and BPDU Forwarding
IGMP SnoopingIPv4 IGMP snooping v1, v2, v3
IGMP querier
Up to 256 multicast groups
MLD SnoopingIPv6 MLD snooping v1, v2, up to 256 multicast groups
QoSIngress/Egress Rate Limit per port bandwidth control
8-level priority for switching
Port number
802.1p priority
DSCP/IP precedence of IPv4/IPv6 packets
Typical network application
DSCP remarking
RingSupports ERPS, and complies with ITU-T G.8032
Recovery time < 450ms
Security Functions
Access Control ListIPv4/IPv6 IP-based ACL/MAC-based ACL
IPv4/IPv6 IP-based ACE/MAC-based ACE
Max. 256 ACL entries
Port SecurityIEEE 802.1X – Port-based authentication
Built-in RADIUS client to co-operate with RADIUS server
RADIUS/TACACS+ user access authentication
MAC SecurityIP-MAC port binding
MAC filter
Static MAC address, max. 256 static MAC entries
Enhanced SecurityDHCP Snooping and DHCP Option82
STP BPDU guard, BPDU filtering and BPDU forwarding
DoS attack prevention
ARP inspection
IP source guard
Management Functions
Basic Management InterfacesConsole; Telnet; Web browser; SNMP v1, v2c
Secure Management InterfacesSSHv2, TLS v1.2, SNMP v3
System ManagementFirmware upgrade by HTTP protocol through Ethernet network
Configuration upload/download through HTTP
Remote Syslog
System log
LLDP protocol
SNTP
PLANET Smart Discovery Utility
PLANET NMS System/CloudViewer app
Event ManagementRemote/Local Syslog
System log
SNMP MIBsRFC 1213 MIB-II
RFC 1493 Bridge MIB
RFC 1643 Ethernet MIB
RFC 2863 Interface MIB
RFC 2665 Ether-Like MIB
RFC 2819 RMON MIB (Groups 1, 2, 3 and 9)
RFC 2737 Entity MIB
RFC 2618 RADIUS Client MIB
RFC 2863 IF-MIB
RFC 2933 IGMP-STD-MIB
RFC 3411 SNMP-Frameworks-MIB
RFC 4292 IP Forward MIB
RFC 4293 IP MIB
RFC 4836 MAU-MIB
IEEE 802.1X PAE
LLDP
MAU-MIB
Standards Conformance
Regulatory ComplianceFCC Part 15 Class A
EN 55032
EN 55035
ICES-003 issue 7
CertificationEN50121-4
Stability TestingIEC 60068-2-32 (free fall)
IEC 60068-2-27 (shock)
IEC 60068-2-6 (vibration)
Standards ComplianceIEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX/100BASE-FX
IEEE 802.3z Gigabit SX/LX
IEEE 802.3ab Gigabit 1000T
IEEE 802.3x flow control and back pressure
IEEE 802.3ad port trunk with LACP
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1s Multiple Spanning Tree Protocol
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN tagging
IEEE 802.1x Port Authentication Network Control IEEE 802.1ab LLDP
IEEE 802.3az for Energy-Efficient Ethernet
RFC 768 UDP
RFC 783 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 2068 HTTP
RFC 1112 IGMP v1
RFC 2236 IGMP v2
RFC 3376 IGMP v3
RFC 2710 MLD v1
FRC 3810 MLD v2
ITU G.8032 ERPS Ring
Environment
Operating Temperature-40 ~ 75 degrees C
Storage Temperature-40 ~ 85 degrees C
Humidity5 ~ 95% (non-condensing)

 

Datasheet

DateVersionDescriptionDownload
2023-04-141.2IGS-4215-16T2S-U
2023-04-141.2IGS-4215-16T2S
2020-01-101.0IGS-4215-16T2S

 

Firmware

DateVersionDescriptionDownload
2024-08-071.305b240729[IGS-4215-16T2S-U]
Function added:
- Added PSTI function.
FW upgrade for PSTIA (Product Security and Telecommunications Infrastructure Act)
*Note: After updating the firmware, you will need to enter the product's MAC code at the first login. Please record the MAC code before proceeding with the update.
2024-07-101.305b240227[IGS-4215-16T2S]
Function Added:
-Added PSTI function.
FW upgrade for PSTIA (Product Security and Telecommunications Infrastructure Act)
*Note: After updating the firmware, you will need to enter the product's MAC code at the first login. Please record the MAC code before proceeding with the update.
2023-05-121.305b230224Initial Release for IGS-4215-16T2S-U.
2021-06-041.305b210528[IGS-4215-16T2S]
Function Added -
1. ERPS Ring
2. Enhanced Cybersecurity
- Telnet default disabled
- SSH default disabled
3. Supports NMS Controller
4. Supports SNMP LLDP MIB
5. Patch DDM SFP LOS information
2020-02-271.305b200221[IGS-4215-16T2S]
Bugs Fixed -
1. Fixed spelling errors.
2. Fixed the issue that the port description couldn't be synchronized to the SNMP Interface MIB.
3. Synchronized Cable Diagnostic to display network cable length.

 

Quick Guide

DateVersionDescriptionDownload
2024-04-121.3Release for PSTI version.
2023-03-251.2Add IGS-4215-16T2S-U.
2020-02-101.0Initial release.

 

User's Manual

DateVersionDescriptionDownload
2023-06-091.2Modify contents of user manual.
2021-11-171.1Add IGS-4215-8T2S and IGS-4215-4T2S.
2020-01-241.0Initial release.

 

EC Declaration

DateVersionDescriptionDownload
2020-07-081.0EC Declaration.