Menu
Καλάθι Αγορών

PLANET WGS-E304PT Industrial 1-Port 10/100/1000T 802.3bt PoE++ to 4-Port 802.3at PoE+ Wall-mounted Extender

PLANET WGS-E304PT Industrial 1-Port 10/100/1000T 802.3bt PoE++ to 4-Port 802.3at PoE+ Wall-mounted Extender
PLANET WGS-E304PT Industrial 1-Port 10/100/1000T 802.3bt PoE++ to 4-Port 802.3at PoE+ Wall-mounted Extender
PLANET WGS-E304PT Industrial 1-Port 10/100/1000T 802.3bt PoE++ to 4-Port 802.3at PoE+ Wall-mounted Extender
PLANET WGS-E304PT Industrial 1-Port 10/100/1000T 802.3bt PoE++ to 4-Port 802.3at PoE+ Wall-mounted Extender
PLANET WGS-E304PT Industrial 1-Port 10/100/1000T 802.3bt PoE++ to 4-Port 802.3at PoE+ Wall-mounted Extender
PLANET WGS-E304PT Industrial 1-Port 10/100/1000T 802.3bt PoE++ to 4-Port 802.3at PoE+ Wall-mounted Extender
PLANET WGS-E304PT Industrial 1-Port 10/100/1000T 802.3bt PoE++ to 4-Port 802.3at PoE+ Wall-mounted Extender
PLANET WGS-E304PT Industrial 1-Port 10/100/1000T 802.3bt PoE++ to 4-Port 802.3at PoE+ Wall-mounted Extender
PLANET WGS-E304PT Industrial 1-Port 10/100/1000T 802.3bt PoE++ to 4-Port 802.3at PoE+ Wall-mounted Extender
  • Διαθεσιμοτητα: Διαθέσιμο
  • Κατασκευαστης: PLANET
  • Κωδικος Προϊοντος: WGS-E304PT
  • Βαρος: 0.82kg
  • Διαστασεις: 2.42 x 14.80 x 13.40
189,23€
Χωρίς ΦΠΑ: 152,61€

PoE Solution for Long-reach Distance

PLANET WGS-E304PT is an industrial 1-Port 802.3bt PoE++ to 4-Port 802.3af/at Gigabit PoE Extender designed especially for the point to multipoint PoE application. The WGS-E304PT can obtain a maximum of 95-watt PoE power from 802.3bt PoE++ input port and supplies a maximum of 70-watt PoE power budget for 4 PoE output ports, extending both the reach of Gigabit Ethernet Data and IEEE 802.3at Power over Ethernet over the standard 100m (328 ft.) Cat. 5/5e/6 UTP cable to 250m where up to 4 powered devices (PDs) can be powered at the same time. The WGS-E304PT provides a simple solution for adding PoE ports without running more cabling and achieves more flexible network applications without requiring an external power adapter.

 

 

Environmentally-hardened Design

With industrial-grade IP30 metal case, the WGS-E304PT provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb-side traffic control cabinets. Being able to operate under the temperature range from -40 to 75 degrees C, the WGS-E304PT can be placed in almost any difficult environment.

DIP Switch for Operation Mode Selection

The WGS-E304PT offers “Standard”, “VLAN” or “Extend” mode. The WGS-E304PT operates as a normal Gigabit Ethernet Switch in the "Standard" operation mode. 

The "VLAN" operation mode features port-based VLAN function that can help to prevent the connected clients’ multicast or broadcast storm from influencing each other.

 

In the "Extend" operation mode, the WGS-E304PT operates on a per-port basis at 10Mbps duplex operation but can transmit data over a distance of up to 250 meters overcoming the 100m limit on Ethernet UTP cable. With this brand-new feature, the WGS-E304PT provides an additional solution for distance extension, thus saving the cost of Ethernet cable installation. 

DIP Switch ModeFunction

Standard (default)

This mode makes the WGS-E304PT operate as a general switch and all ports operate at 10/100/1000Mbps auto-negotiation.
VLAN

This mode makes the WGS-E304PT operate as a VLAN isolation switch and 

  1. Port 1 to port 4 will isolate respectively.
  2. Port 1 to port 4 can only communicate with port 5 (uplink port).
ExtendThis mode makes the WGS-E304PT operate as a distance extension switch and port 1 to port 4 can only transmit distance of 250m at speed of 10Mbps.                         

 

Innovative Wall-mount Installation

The WGS-E304PT is specially designed to be installed in a narrow environment, such as wall enclosure. The compact, flat and wall-mounted design fits easily in any space-limited location. It adopts the user-friendly “Front Access” design, making the installing, cable wiring, LED monitoring and maintenance of the WGS-E304PT placed in an enclosure very convenient for technicians. The WGS-E304PT can be installed by fixed wall mounting, magnetic wall mounting or DIN rail, thereby making its usability more flexible. 

Plug and Play, Easy Cabling Installation

The WGS-E304PT can be easily installed by way of Plug and Play. It is used between a power source equipment (PSE) and the PD. The WGS-E304PT injects power to the PD without affecting the data transmission performance. The WGS-E304PT offers a cost-effective and quick solution to doubling the standard range of PoE from 100 to 250 meters. The WGS-E304PT is designed in a compact box containing 5 RJ45 ports, of which 1 "PoE IN" port functions as PoE (Data and Power) input and 4 "PoE OUT" ports on the other side functions as PoE (Data and Power) output. The "PoE OUT" port is also the power injector where DC voltage is transmitted over Cat. 5/5e/6 cable, and data and power are simultaneously transferred between the PSE and PD.

One Power Source for Multi Powered Devices 

Is 100-meter cable long enough for a wide range of IP surveillance deployments? The answer is certainly not.  To achieve the benefits of IP surveillance where IP cameras are installed in a remote location, PLANET WGS-E304PT is very useful for expanding the network already set up without worrying about the cabling distance limitation. In contrast, the conventional networking does not have the flexibility of network expansion. 

      

 

The WGS-E304PT industrial 1-Port 802.3bt PoE++ to 4-Port 802.3af/at Gigabit PoE Extender requires very little installation time and does not require any additional setup or programming by using standard RJ45 cable from power sourcing device, such as 802.3bt PoE++ injector supplying 802.3bt PoE++ power, to the WGS-E304PT and converting power for 4 powered devices that are IEEE 802.3af/at PoE standard compliant, meaning any additional power adapter for IP cameras and wireless access points is not necessary. 

Physical Port

  • Five 10/100/1000BASE-T Gigabit RJ45 interfaces
    • 1-port data + power input
    • 4-port data + power output

 

Power over Ethernet

  • 1-port data + power input
    • Complies with 802.3bt Power over Ethernet Plus Plus end-span and mid-span PD
    • Complies with IEEE 802.3at Power over Ethernet Plus end-span/mid-span PD
    • Supports PoE input power up to 95 watts
  • 4-port data + power output
    • Complies with IEEE 802.3af/at PoE/end-span PSE
    • Up to 4 IEEE 802.3af/at devices powered
    • Supports PoE power up to 30 watts for each PoE port
    • Auto detects powered device (PD)
  • Extends the range of PoE to an additional 100 meters (328ft.)
  • Forwards both Ethernet data and PoE power to remote device 

 

Layer 2 Features

  • Features Store-and-Forward mode with wire-speed filtering and forwarding rates
  • Integrates address look-up engine, supporting 2K absolute MAC addresses
  • 9K jumbo frame support in 1000Mbps duplex mode
  • Automatic address learning and address aging

 

Industrial Case and Installation

  • IP30 metal case 
  • DIN-rail and wall-mount designs
  • DIP switch for multi-operation mode options (Standard/VLAN/Extend) selection
  • Supports 6000V DC Ethernet ESD protection
  • -40 to 75 degrees C operating temperature
  • No external power cable required for installation
  • Plug and Play installation
Hardware Specifications
Network ConnectorPoE In Port
1 x 10/100/1000BASE-T Ethernet with 802.3bt PoE++ “Data + DC” in
Auto MDI/MDI-X, auto-negotiation RJ45 connector
PoE Out Port
4 x 10/100/1000BASE-T Ethernet with IEEE 802.3af/at PoE “Data + DC” out
Auto MDI/MDI-X, auto-negotiation RJ45 connector
Switch ArchitectureStore-and-Forward switch architecture
MAC Address Table2K MAC address table with auto learning function
Switch Fabric10Gbps
Switch Throughput7.44Mpps @ 64Bytes
Flow ControlIEEE 802.3x pause frame for full duplex
Back pressure for half duplex
Jumbo Frame9Kbytes
ESD Protection Air 8KV DCContact 6KV DC
Surge Protection6KV
EnclosureIP30 metal case
InstallationDIN-rail kit and wall-mount ear
Dimensions (W x D x H)148 x 24.2 x 134 mm
Weignt457g
LEDPoE Input Port (Port 5):
LNK/ACT(Green)
PoE: Power-in-use (Amber)
PoE Output Ports (Ports 1~4):
LNK/ACT(Green)
PoE: Power-in-use (Amber)
DIP SwitchMulti-operation mode options (Standard/VLAN/Extend) selection
Power Consumption8.6 watts/29 BTU (Power On)
82 watts/279 BTU (Full loading with PoE function)
Power over Ethernet
PoE StandardPoE in Port
IEEE 802.3bt PoE++ Type 4 standard PD
IEEE 802.3at PoE+ end-span/mid-span PD
Per PoE out Port
IEEE 802.3at Power over Ethernet Plus end-span PSE
PoE PowerPoE in Port
50~57V DC, max. 95 watts
Per PoE out Port
44~55V DC, max. 30.8 watts
Power Pin AssignmentPoE in Port
1/2(-), 3/6(+), 4/5(+), 7/8(-) or 1/2(+), 3/6(-), 4/5(+), 7/8(-)
Per PoE out Port
1/2(+), 3/6(-)
PoE Power Budget65-70 watts (max.) @ 802.3bt PoE++ Type 4 input
Standards Conformance
Regulatory ComplianceFCC Part 15 Class A, CE
Stability TestingIEC60068-2-32 free fall
IEC60068-2-27 shock
IEC60068-2-6 vibration
Standards ComplianceIEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3x Flow Control
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3bt Power over Ethernet Plus Plus
Environment
OperatingTemperature: -40 ~ 75 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
StorageTemperature: -40 ~ 85 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)

 

Datasheet

DateVersionDescriptionDownload
2023-09-231.0WGS-E304PT

 

User's Manual

DateVersionDescriptionDownload
2023-09-081.0Initial release.